Specifications - Uniden DSC Series Owner's Manual

General
Channels
Controls
Status Indicators
Channel Display
Channel Selector
Buttons
Connectors
Size
Weight
Supply Voltage
Antenna Impedance
Microphone
Speaker
Operating Temperature Range
Shock and Vibration
FCC Approvals
Transmitter
Power Output
Power Requirement
Modulation
Signal-to-Noise
Audio Distortion
Spurious Suppression
Output Power Stabilization
Frequency Range
Frequency Stability:
Receiver
Frequency Range
Sensitivity
Circuit
Squelch Sensitivity
Spurious Response
Adjacent Channel Selectivity
Audio Output Power
Power Requirement
IF Frequencies
Specification
Transmit 54
Receive 80 Marine
10 Weather
ON/OFF/Volume, Squelch
16, INT, LO, TX LED (transmit)
LED (Dual 7 segment)
UP/DWN select keys
CH16, INT, HI/LO
Antenna and remote speaker
82mmH x 189mmW x 207mmL
1.2 kg (with Microphone)
13.8V DC negative ground
50Ω, nominal
Condenser Microphone with curl cord
(Impedance 2kΩ)
1.82 inch, 8Ω
-20°C to +50°C (-4°F to +122°F)
Meets or exceeds EIA standards, RS152B and
RS204C
Type accepted under part 80 of the Rules; meets
Great Lakes Agreement and party boat requirements
1 watt or 25 watt (switch selectable)
1 watt output:
25 watts output:
FM ±5 kHz deviation (FCC designator F3E)
45 dB at 3 kHz
Less than 5% with 3 kHz deviation with 1000 Hz
modulating frequency
-60 dB at 1 watt, -65 dB at 25 watts
Built-in automatic level control (ALC)
156 to 158 MHz
±300 Hz nominal
156 to 163 MHz
0.25µV for 12 dB SINAD
0.35µV for 20 dB S/N
Dual Conversion Super Heterodyne PLL
0.2µv Threshold
60 dB
70 dB at ±25 kHz
4.0 watts (10% Distortion) into a 4 Ω load
0.3A at 13.8V DC squelched
0.8A at 13.8V DC at maximum audio output
1st - 16.9 MHz
2nd - 455 kHz
15
1.0A at 13.8V DC
4.5A at 13.8V DC