superbrightleds LDRF-RGB8-TC3B Instruction Sheet

Important: Read all instructions prior to installation.
RGB Controller with Touch Color Re mote
Parts Included
1 - RGB Controller
1 - RF Touch Color Remote
RF Remote
General Description
LDRF-RGB8-TC3(Black or White remotes) three channel RGB (Red,
Green, Blue) LED controller with color touchwheel for directly selecting a
wide range of colors.
Off ers 29 dynamic modes, static white mode, and static single color
modes with adjustable brightness, speed and mode retention (controller
resumes modes with the settings previously selected on power toggle).
Instructions
Pre-test & Confi gure
May be used with RGB strips, bars, modules, and other RGB LED products.
Connect LEDs to power supply and controller
Turn on LEDs using the included remote controller to ensure proper operation of the
LEDs, power supply, controller, and remote.
Red power light will illuminate when controller is powered.
Green receiver light will illuminate when controller is receiving a signal from remote.
Choose suitable dry location for the power supply and controller.
866-590-3533
Button Functions
Turn all LEDs on and off ,
retaining the last setting on
power toggle.
Pauses the current mode,
press the same button again to
resume.
COLOR WHEEL Directly select color on wheel
from any mode or color selection
by touching the color wheel.
Rotate fi nger around to fi ne tune
desired color.
BRIGHTNESS +/- Dim LEDs in any static color
mode by pressing (
Brighten LEDs by pressing
( ) symbol.
SPEED +/- Increase ( ) and decrease
( ) speed on dynamic modes.
MODE +/- Cycle up or down through 29
diff erent dynamic modes, static
white, and static color modes.
RF remote controller has a signal range
up to 65ft (20m) and requires 3 x AAA
batteries (not included).
support@superbrightleds.com
Static White Mode
Press " " mode button until white. Brightness is
adjustable using "
Static Color Mode
To select a static color from any mode:
Press the color wheel to select your color. Brightness is
adjustable using "
Modes List
Mode Function
1 Static Red
) symbol.
2 Static Blue
3 Static Green
4 Static Cyan
5 Static Yellow
6 Static Purple
7 Static White
Dynamic Modes
Mode Function
8 RGB jump changing
9 7 color jump changing
10 RGB static fade
11 7 color general change
12 Red strobe fl ash
13 Green strobe fl ash
14 Blue strobe fl ash
15 Yellow strobe fl ash
16 Cyan strobe fl ash
17 Purple strobe fl ash
18 White strobe fl ash
19 Red/green strobe fl ash
20 Red/blue strobe fl ash
21 Blue/green strobe fl ash
22 All colors fl ash
23 Red fl ash
24 Green fl ash
25 Blue fl ash
26 Yellow fl ash
27 Cyan fl ash
28 Purple fl ash
29 White fl ash
Instruction Sheet
Part Number:
LDRF-RGB8-TC3B
LDRF-RGB8-TC3W
" (dim) " " (bright) buttons.
" (dim) " " (bright) buttons.
Static Modes
Dimmable
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Speed Adjustable
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes