Uniden CXAI 5198 SERIES Owner's Manual page 34

note
If you want to directly
access the speed dial
location, press and hold
0-9 in standby mode,
and then press
talk/flash
( (speaker) on the
base) or remove the
corded handset from the
base.
[ 3 3 ] U S I N G T H E S P E E D D I A L M E M O R Y
If a message has already been stored in the selected
memory number location, a confirmation screen is displayed.
Press the volume up key (
/ /select/volume) to select
(set on the base) to overwrite. The display returns to the
Caller ID data.
Making Calls from Speed Dial Memory
1) Press memory (mem on the base). The handset or base
displays your programmed speed dial number.
2) Enter the number (0 - 9), or press the volume up or down
key ( / / /volume or
select the speed dial number you would like to dial.
3) Press talk/flash (
the corded handset from the base. Then the displayed
number is dialed.
To cancel speed dialing
Press end ( (play/stop) on the base) to cancel speed dialing. The phone returns to
standby mode.
Also, if the phone is idle (e.g., no key is pressed) for 30 seconds, the phone returns to
standby mode.
/ /volume or
Y e s
. Press select/int'com
/ / /select/volume) to
(speaker) on the base) or remove
w w w . u n i d e n . c o m