Setting The Toll Saver Switch; Using The Reset Button; Vox/Calling Party Control Feature - Uniden XCA550/55 Instruction Manual

2. While your recorded outgoing message is
playing, press ogm again.
A tone will sound, and you hear one of the
preset messages. After the message plays,
and the Answering System automatically
returns to Standby.
Note: The message, "Hello. No one is
available to take your call" is played if the
rec time ANN/4/1 is set to announce only.
3. To select your
recorded message
again, press ogm .
The preset
message will begin
to play on the Base
Unit speaker.
4. While the preset message is playing, press
ogm again.
A tone will sound, and your recorded message
will play. When your message finishes the
Answering System automatically returns to
Standby.

Setting the Toll Saver Switch

The Ring Time/Toll Saver switch allows you to set
the number of rings the caller hears before your
Answering System answers. You can set the
switch to answer after 2 or 4 rings. In the Toll
Saver (TS) position, the Answering System
answers after two rings when you have messages
recorded, and it answers after four rings if there
are no messages. So if you call long distance to
check your messages, you can hang up after the
second ring and not be billed.
ring time
2-4-TS
ring time
2-4-TS
24
delete
answer
00
status
repeat play/stop
page/find
pin ogm memo
Extend A Phone
• •
rec time
ANN/4/1

Using the Reset Button

The reset button is used to erase all recorded
outgoing messages and any messages which are
saved in memory. Pressing reset does not erase
your PIN (Personal Identification Number) code or
the security code between the Handset and Base
Unit.
Press reset to delete all stored messages and
to erase your personal ogm .
volume
skip
clock
Note: The reset button may also be used in the
unlikely event that an AC power line
disturbance causes the answering system to
malfunction and become inoperative.
VOX/Calling Party Control
Feature
The Calling Party Control (CPC) feature allows
your Answering System to disconnect and reset if
the caller hangs up before leaving a message.
This prevents your Answering System from using
recording time to record a hang up/dial tone
message.
reset
XCA550/55