Setting The Toll Saver Switch; Using The Reset Button - Uniden EXA 7950 Owner's Manual

SETTING THE TOLL SAVER SWITCH

The ring time/toll saver switch
allows you to set the number
of rings the caller hears before
your answering system plays
your outgoing message.
You can set the switch to answer
after two rings or after four
rings. In the (Toll Saver)
TS
position, the answering system
picks up after two rings if you
have new messages, and after four rings if there are none. This way, if
you call long distance to check your messages, you can hang up after
the second ring to avoid billing charges.

USING THE RESET BUTTON

The button is used to
RESET
initialize the base computer.
The RESET button can be used if an AC power line disturbance
causes the answering system to malfunction and become
inoperative. Pressing
your system memory.
does NOT erase any data stored in
RESET
21