During The Training - Sigma ROX 12.0 SPORT Full Manual

7.2 DURING THE TRAINING

Once you start the training, all data will be recorded.
The ROX 12.0 SPORT will record all data, even those
not displayed.
You may select the most important values during
the training, only and go to a deeper analysis after
the training with all data.
IMPORTANT:
You can start a navigation at any time. Push the
home button to go to the home screen. Here you
can select a navigation or a track.
NOTE:
You can reduce the map to a small cube in the
training view. If you would like to enlarge the map
temporarily, simply tap on the map. The map will
be shown in full screen for 10 seconds. You can
have a closer look and afterwards the full screen
will be closed automatically.
You can change the zoom level as well. The
selected zoom level will be kept until you change
it again.
You have the same function for the altitude profile as well. Just tap on the altitude profile to adjust the zoom
level or take a detailed look. It is very easy to change functions in the training view. Just push and hold the value
you would like to replace. The submenu will open and the categories of the different values will be shown. Select
the one you would like have on display.
Please take note, that a graphic function is not fit for a small cube.