Multiple Point Navigation - Sigma ROX 12.0 SPORT Full Manual

5.2 MULTIPLE POINT NAVIGATION

The ROX 12.0 SPORT offers the option to create
a route with multiple points.
It is following the same steps as the single point route.
Once you selected a point, you just have to add another
one.
Beside a point, you can also add a track or an activity.
You can create a new route out of an existing one.
A route can consist of up to 50 points.
You can change their order by holding an entry and
move it up or down.
The following options are available in the contex menu:
– Delete All
Delete all entries
– Delete Selection
Select those entries you would like to delete.
– Reverse
You can reverse the whole order of points and
get the route in the opposite direction.
– Routing Options
You can modify the routing options for this
single ride. The settings won't affect the general
routing options of the sport profile.
Once you are ready with adding waypoints,
simply push the button „Show Route".
You will see an overview of your route including the
distance and altitude profile. Your actual position is
the starting point of the route you created.
NOTE:
If the distance to the starting point of
the route is longer than 300 km, the
ROX 12.0 SPORT won't calculate the
route and will show an error message.
If you want to plan a route for your holidays
or for your training camp, we recommend
using the DATA CENTER. Once you planned
your routes, you can simply sync them via
SIGMA CLOUD (WiFi) or transfer it via USB
to the ROX 12.0 SPORT.
If you would like to
delete individual
points/point, simply
swipe from right to
left.