Sigma ROX 12.0 SPORT Full Manual page 19

4.3.1 SETTINGS
NOTE:
If you are using a power meter, you will find the options "Auto Zero Calibration" in the sensor details.
You can start the calibration request here. If a power meter is connected you can find the same option in
the short cut menu as well.
Some sensors are providing several details about the
status of the sensor, like battery state of charge. If you
want to check it, please check the sensor details as
well.
The following ANT+ Profiles are supported:
– Speed
– Cadence
– Speed & Cadence Combo
– Heart Rate
– Power (PWR + CTF) – No Cycling Dynamics
– Shifting Profile – Di2, eTap, Campa EPS
– Shimano Di2
– Shimano STEPS
– LEV (E-Bike Profile)
– Remote
– Rotor Power Meter – incl. Values OCA/OCP
NOTE:
If you are using a ROTOR power meter,
you must pair it as ROTOR power meter,
otherwise the specific ROTOR values won't
be shown on the ROX 12.0 SPORT.