Assembling The Food Grinder Attachment - KitchenAid 5FGA Manual

USING THE STAND MIXER ATTACHMENT

ASSEMBLING THE FOOD GRINDER ATTACHMENT

Insert the small grind worm into the
1
grinder body.
Place grinding plate over the knife,
3
matching the tabs of the plate with
the notches on the grinder body.
NOTE: The combination food pusher/wrench is used for removal of the ring only. To
avoid damage to the attachment, do not use the combination food pusher/wrench to
tighten the ring to the grinder body.
NOTE: A Fruit and Vegetable strainer is available to convert the Food Grinder to
a Fruit and Vegetable Strainer. A sausage stuffer is available to convert the Food
Grinder to a sausage stuffer.
Place the knife blade over the square
2
shank at the exposed end of the
grind worm.
Place the ring on the grinder body,
4
turning by hand until secured but not
tightened.
USING THE STAND MIXER ATTACHMENT | 11