Attaching The Grinder/Strainer To The Stand Mixer - KitchenAid 5FGA Manual

USING THE STAND MIXER ATTACHMENT

ATTACHING THE GRINDER/STRAINER TO THE STAND MIXER

1
Turn the Stand Mixer off and unplug.
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
2
For Stand Mixers with a removable attachment hub cover: Turn the attachment
knob counterclockwise to remove attachment hub cover.
Insert the attachment shaft housing
into the attachment hub, making
certain the power shaft fits into the
square hub socket. If necessary, rotate
3
the attachment back and forth. The
pin on the attachment housing fits
into the notch of the hub rim when
in the proper position.
Tighten the Stand Mixer attachment
hub knob until the attachment
4
is completely secured to the
Stand Mixer.
USING THE STAND MIXER ATTACHMENT | 13