Page 3
English ............... 5 Deutsch ..............15 Français ..............25 Italiano ..............35 Nederlands .............. 45 Español ..............55 Português ..............65 Ελληνικά ..............75 Svenska ..............85 Norsk ............... 95 Suomi ..............105 Dansk ..............115 Íslenska ..............125 Русский ..............135 Polski ..............
TABLE OF CONTENTS PARTS AND FEATURES ..................6 Parts and accessories ..................6 STAND MIXER ATTACHMENT SAFETY ..............7 Important safeguards ..................7 Waste disposal ....................8 USING THE STAND MIXER ATTACHMENT............9 Grain Mill Attachment chart ................9 Before first use: cleaning the Grain Mill Attachment ........10 Attaching the Grain Mill to the Stand Mixer ..........11 Using the Grain Mill Attachment ..............12 CARE AND CLEANING ..................13...
STAND MIXER ATTACHMENT SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision...
7. The use of attachments not recommended or sold by KitchenAid may cause fire, electrical shock, or injury. 8. Do not use the appliance outdoors. 9. Avoid contacting moving parts. Keep fingers out of discharge opening.
Coffee beans may be ground with or any utensil. The moving grind the KitchenAid Artisan Burr Grinder. worm will feed the grain into the • Do not grind grains or nuts with grinding burrs.
USING THE STAND MIXER ATTACHMENT BEFORE FIRST USE: CLEANING THE GRAIN MILL ATTACHMENT IMPORTANT: The grinding burrs of the Grain Mill Attachment have been lightly coated with mineral oil to help avoid rusting during storage. Before using the Grain Mill Attachment, wash off the oil with a mild detergent solution and allow to dry thoroughly.
USING THE STAND MIXER ATTACHMENT ATTACHING THE GRAIN MILL TO THE STAND MIXER Turn Stand Mixer off and unplug. For Stand Mixers with a hinged attachment hub cover: Flip up to open. For Stand Mixers with a removable attachment hub cover: Turn the attachment knob counterclockwise to remove the attachment hub cover.
USING THE STAND MIXER ATTACHMENT USING THE GRAIN MILL ATTACHMENT TIP: Note the grind symbols at the top of the dial. The Fine Grind symbol indicates the finest grind setting. The Coarse Grind symbol indicates the setting for the grind that is most coarse.
CARE AND CLEANING CLEANING THE GRAIN MILL ATTACHMENT Clean the burrs and all other parts If the Grain Mill Attachment must be with the provided brush. The Grain washed, wash it by hand with mild Mill Attachment does not necessarily detergent and warm water.