Table of Contents
Advertisement
Hardware Features
No.
3
4
5
6
7
Hardware Features
The following are the units of Cisco 5100 ENCS:
• M.2 storage module: This is a high capacity storage component on the motherboard. The OS is installable
• DDR4 DIMM Slots: There are two DDR4 dual in-line memory module (DIMM) slots on the motherboard.
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
6
LED Label
AMD Management port
Link LED
WAN port GE Speed
LED
WAN port GE Link LED
WAN port SFP Enable
LED
WAN port SFP Speed
LED
in this module. The storage capacity of this module is upgradeable. The different storage capacities that
are currently available for this module are 64GB, 200GB, and 400GB. Other storage capacities might
be made available in the future.
Each slot can hold 8 GB or 16 GB memory module. The memory module in each of the slots can be
upgraded to a maximum of 16 GB. As a result, you can have a maximum capacity of 32 GB.
Overview of the Cisco 5100 Enterprise Network Compute System
Color
Green
Blinking green
Green
Green
Amber
Blinking green
Behavior
Ethernet cable present and
link established with other
side.
Green Blinking: blink
frequency indicates port
speed:
1 blink – 10Mbps link
speed
2 blinks – 100Mbps link
speed
3 blinks – 1000Mbps link
speed
Ethernet cable present and
link established with other
side.
Indicates SFP module
detected and recognized.
Indicates SFP is not
recognized or in a fault
state.
Blink frequency indicates
port speed:
3 blinks – 1000Mbps link
speed
Advertisement
Table of Contents
