Wall-Mounting The Chassis - Cisco 5100 Series Hardware Installation Manual

Installing the Device
Figure 7: Mounting the Chassis on the Rack - Front and Back
Tip
The screw slots in the brackets are spaced to line up with every second pair of screw holes in the rack. When
the correct screw holes are used, the small threaded holes in the brackets line up with unused screw holes in
the rack. If the small holes do not line up with the rack holes, you must raise or lower the brackets to the next
rack hole.

Wall-Mounting the Chassis

These are the steps to wall mount the chassis:
Step 1 Attach the brackets to the device using the screws provided with the mounting kit.
Two screws should be used to attach each bracket to the chassis as shown in the following figure.
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
Wall-Mounting the Chassis
17