Advertisement
14
English
The Quadpacer feature on this model has been activated. To
deactivate or reactivate the Quadpacer feature:
1 Place the handle with a brush head attached in the plugged-in
charger.
2 Press and hold the personalized brushing button until:
a You hear 1 beep to indicate the Quadpacer has been
deactivated.
b You hear 2 beeps to indicate the Quadpacer has been
activated.
Note: The Quadpacer feature cannot be deactivated on the pre-
programmed Go Care and Max Care brushing routines.
Integrated cord wrap of UV sanitizer
You can store excess cord using the cord wrap feature built into the
bottom of the sanitizer (Fig. 8).
Sanitizing
- With the UV sanitizer you can clean your brush head after every
use (Fig. 9).
Unplug the sanitizer, discontinue use and call Consumer Care if:
- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitizer.
- The sanitizer gives off smoke or a burning smell while it is
operating.
Note: UV light can be harmful to the human eye and skin. This device
should be kept out of reach of children at all times.
1 After brushing, rinse the brush head and shake off excess water.
Warning: Do not place the travel cap on the brush head
during sanitization.
Advertisement
