Advertisement
Activating or deactivating the Easy-start feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger.
- To deactivate Easy-start:
Press and hold the power on/off and mode button for 5 seconds.
You hear 1 beep to indicate that the Easy-start feature has been
deactivated.
- To activate Easy-start:
Press and hold the power on/off and mode button for 5 seconds.
You hear 2 beeps to indicate that the Easy-start feature has been
activated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Note: Easy-start feature is only active in Clean Mode.
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing
cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and
pause to remind you to brush the 4 sections of your mouth.
Depending on the brushing mode or brushing routine you have
selected, the Quadpacer beeps at different intervals during the
brushing cycle. See the 'Brushing instructions' and 'Personalizing
your brushing experience' sections (Fig. 7).
13
English
Advertisement
