Using The Speed Dial Memory; Storing Names And Numbers In Speed Dial Memory - Uniden SS E15 Series Owner's Manual

Using the Speed Dial Memory

The speed dial memory allows you to store up to 10 names and numbers in the
handset. You can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any
number (up to 20 digits) that you need to enter once your call connects. This is
referred to as Chain Dialing. For example, you can save your bank account
number to speed dial memory. When you call your bank's telephone teller
service and are prompted to enter your account number, simply press the
memory key and the speed dial number where you stored your account number.

Storing Names and Numbers in Speed Dial Memory

1) With the phone in standby mode, press the
memory key.
2) Enter 0 - 9 to select the speed dial number where you
would like to store this entry. You can also scroll
through the list with the volume/
/- keys. Press the select
3) appears and a cursor flashes indicating
Store Name
that the display is ready for the name to be entered.
If the selected speed dial number is already assigned,
the Edit screen appears. You can select
to edit this entry, select Delete Memory
entry, or select
Go Back
dial number.
/+ and volume /
key twice.
Edit Memory
to delete this
to choose another speed
[21]
When editing the
!
speed dial
memory, you
must press a key
within 30
seconds or
the phone will
return to standby
mode. If you
return the
handset to the
base, the phone
will return to
standby mode
also.
For New
!
Zealand, Telecom
access numbers
are pre-
programmed into
speed dial
locations as
follows;
Divert ON: SPD1
Divert OFF:SPD2
Block CID: SPD3
Messages: SPD4
Directory: SPD6