Table of Contents
Advertisement
Post Operation Maintenance
Submerged (Waterlogged) Watercraft (continued)
CAUTION
Operating the watercraft without a drain plug can
result in serious engine damage. Always ensure
that all drain plugs are properly installed before
operating the watercraft.
NOTE:
The MSX 110 does not have an intercooler
drain plug. If your watercraft is an MSX 110,
skip the following step. Continue with step 10.
9. On the MSX 150
only, remove the
drain plug from the
front of the
intercooler and tip the
boat to allow all water
to drain out. Apply
marine grade silicone
to the threads and
reinstall the plug.
Hand tighten with a
5mm Allen wrench.
https://www.boat-manuals.com/
10. Remove the drain plug
from the rear of the
intake manifold and tip
the boat to allow all
water to drain out.
Apply marine grade
silicone to the threads
and reinstall the plug.
Hand tighten with a
5mm Allen wrench.
11. Promptly take the watercraft to an authorized
Polaris dealer for additional service.
CAUTION
Failure to have a submerged watercraft serviced
shortly after submersion will result in serious
engine damage. Always have an authorized
Polaris dealer service a submerged watercraft
promptly.
OPERATION
71
Hide quick links:
Advertisement
Table of Contents
