Polaris MSX 110 Owner's Manual For Maintenance And Safety page 58

Before Starting the Engine
Before starting the engine:
1. View the watercraft safety video provided with the
watercraft.
2. Read and understand this Owner's Manual.
3. Be familiar with all controls and functions of the
watercraft.
4. Perform the pre-operation check found on page 36.
If you have any questions about the features or controls
of this watercraft, see your Polaris dealer.
CAUTION
If the engine is run while the watercraft is in very
shallow water, sand, weeds and debris may be
sucked into the jet intake and could cause
damage to the impeller or injury to bystanders.
Ingesting sand into the cooling system will cause
the engine to overheat, which could lead to
engine damage.
Whenever starting the engine, always be sure the
watercraft is in water at least two feet (60 cm)
deep.
https://www.boat-manuals.com/
Starting the Engine
1. Attach the lanyard wrist band (1) to your left wrist
or PFD.
2. Fasten the lanyard lock plate (2) to the engine stop
switch on the handlebars by pushing the lock plate
around the barrel of the switch. Be sure the lanyard
is not tangled around the handlebars or controls.
NOTE: The engine will not start if the lanyard lock
plate is removed from the engine stop
switch.
1
2
OPERATION
55