Polaris MSX 110 Owner's Manual For Maintenance And Safety page 34

Next Generation Instrument (NGI)
Instrument Operation
CLOCK SET
In the main mode, press and hold the RESET button
until the hour digits flash (approximately six seconds).
Press the RESET button to advance the hour digits.
Press the MODE button to stop the hour flash and
begin the minute digits flash. Press the RESET button
to advance one minute. Press the MODE button to set
the clock and exit the clock set mode.
TRIP ODOMETER RESET
Press and hold the RESET button until the trip
odometer is reset to 000.0 miles / km.
CHANGE UNITS OF MEASURE
To toggle between standard and metric units of
measure, press and hold the MODE button for ten
seconds.
https://www.boat-manuals.com/
FEATURES AND CONTROLS
Display Warnings
Regardless of the type of warning, a blinking red LED
warning will illuminate and a corresponding ISO
symbol will appear on the LCD screen. The NGI will
alert the operator to the following conditions:
S LOW FUEL (fuel level reaches 1/8 level)
S LOW OIL PRESSURE
S LOW BATTERY VOLTAGE
(Battery voltage is at or below 10.9 volts DC)
S HIGH TEMPERATURE
(Temperature is monitored by ECU)
S CHECK ENGINE
(Check engine warning is triggered by ECU)
31