Recovering Back To Default Configuration - Planet IGS-6325-16P4S Quick Installation Manual

6. Recovering Back to Default Configuration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address "192.168.0.100" and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
1
3
5
7
9
11
13
15
802.3at PoE+
P1 P2 Fault
Ring R.O.
2
4
Console
115200,N,8,1
Reset
6
8
10
100 LNK
1000 LNK
12
14
16
LNK ACT
IGS-6325-16P4S
PoE-in-Use
Figure 6-1: IGS-6325 Series Reset Button
I/O
Reset Button
17
18
ACT
ACT
19
20
15