Table of Contents
Advertisement
• Base
• Handset
Do the following steps:
A. Choose the best location
B. Install the battery pack
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included
in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
Here are some important guidelines you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid television sets and other
electronic equipment
Choose a central location
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The location should be close to both a phone jack and a continuous power outlet which is not
switchable.
• Keep the base and handset away from sources of electrical noise such as motors and fluorescent
lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
B. Install the battery pack
Charge the battery pack for at least 15-20 hours before plugging the phone line into your
phone.
1) Press in on the battery cover release and slide the cover down
until it comes off.
2) Connect the battery pack connector observing correct polarity
(black and red wires) to the jack inside the battery compartment.
Do not exert any force on this connection. It could cause damage
to the battery or handset. The plastic connector will fit together
only one way. Once you are certain that you have made a good
connection, then insert the battery pack into the battery
compartment. Do not pinch the wires.
3) Securely close the battery compartment cover by sliding it up
until it snaps into place.
Included with Your Phone
• AC Adapter
• Telephone Cord
Setting up the Phone
C. Connect the base unit
D. Choose the dialing mode
• Rechargeable Battery
Avoid noise sources such as a window by a
street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture, extremely
low temperatures, dust, mechanical
vibration, or shock
Avoid personal computers
Avoid other cordless telephones
2
Advertisement
Table of Contents
