Direct Wall Mounting - Uniden EXI 916 Operating Manual

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone
directly on a wall. Before mounting your phone, consider the following:
Select a location away from electrical cables, pipes, or other items
behind the mounting location that could cause a hazard when
inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of
the Base Unit and Handset.
Use the supplied screws with anchoring devices suitable for the wall
material where the Base Unit will be placed.
1. Insert two mounting screws 3-15/16
inches apart. Allow about 3/16 of an
inch between the wall and screw heads
for mounting the phone.
2. Attach the Wall Mount Adapter
(see page 11, steps 1 and 2).
3. Plug one end of the long telephone
cord into the TEL LINE jack on the Base
Unit.
14
3/16 IN.
3 15/16 IN.