Low Battery Indicator - Uniden EXI 916 Operating Manual

Hang the Handset on the cradle when
the phone is mounted on the wall.
2. Make sure the charge LED on the Base
Unit lights. If the LED doesn't light,
check to see that the AC adapter is
plugged in, and that the Handset is
making good contact with the Base
Unit charging contacts.

Low Battery Indicator

When the Battery Pack in the Handset
is very low and needs to be charged,
the Battery icon on the Handset flashes.
If the Battery icon begins to flash, the phone is programmed to eliminate its
functions to save power. The table below describes what to do to return
your phone to normal operation.
During a Call
—
The Handset beeps and the Battery
icon flashes once every 3 seconds.
Complete your call as quickly as
possible.
Return the Handset to the Base Unit for
charging.
Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
TOTAL CALLS
In Standby Mode
None of the buttons will operate.
The Battery icon flashes once every 3
seconds.
You will not be able to make a call.
Return the Handset to the Base Unit for
charging.
10
21