17
Chain dialing
After dialing a number you may be requested to enter a special access
code, for example, when performing a banking transaction.
Erasing a stored number
Replacing a stored number
Remember, your EXL 8900 Series phone has 10 memory locations,
represented by the numbers (0-9) on the keypad. If you store a phone
number in one of these locations, then attempt to store a different
number in the same location later, the new number will replace the
previous one.
1
Store the access code into one of the
memory locations (0-9).
2
Dial the main number.
3
Press
and the memory location
mem
of the access code at the appropriate
time.
1
Remove the handset from the base.
2
Press
mem
twice.
3
Select the memory location number
(0-9) you want to clear.
You'll hear a long beep confirming that
the number is erased.