The plastic connectors will
fit together only one way.
Make sure the battery's
connector is properly
alighned. Use only the
Uniden Battery pack
(model BT-905) supplied
with your phone.
Charging the battery pack
Charge the battery pack for 12-15 hours before you start using
your phone.
Black
Red
status LED
1
Press the battery cover release.
2
Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3
Slide the battery cover forward
until it snaps into place.
4
Place the handset on the base.
Make sure that the " status "
LED of the base unit lights, and
charging begins. Charge the
battery for at least 12-15 hours.
You can place either side up
for charging the battery.
10