Additional Information; Changing The Digital Security Code - Uniden EXI 3965 Owner's Manual

Changing the Digital Security Code

The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically
set. In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
4 5 6
ghi jkl mno
7 pqrs 8 tuv 9 wxyz
tone
0 #
oper
int'cm/page volume
mute
mic
1 Remove the handset from the base unit.
Press and hold
int'cm/page
2 While the handset is emitting the paging
sound, replace the handset to the base unit and
continue to hold the
Release the
int'cm/page
Leave the handset on the base for more than 3
seconds. A random, new security code is set.
on the base.
for 3 seconds.
int'cm/page
. The paging tone stops.
A D D I T I O N A L I N F O R M A T I O N
note
If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is set
automatically next time
the battery pack
is charged.
[ 39 ]