Call Transfer Feature; Chain Dialing - Uniden EXI 3965 Owner's Manual

Call Transfer Feature

Chain Dialing

[ 30 ] T E L E P H O N E F E A T U R E S
To Transfer from the Handset to the Base
1 Press on the handset. The caller is put on hold and the
int'cm/select
intercom tone sounds on the base.
2 Press or
int'cm/page
but the caller is still on hold.
3 To transfer the call to the base, press
the transfer, press
To Transfer from the Base to the Handset
1 Press on the base. The caller is put on hold and the
int'cm/page
intercom tone sounds on the handset.
2 Press any key on the handset. The intercom mode is activated, but the
caller is still on hold.
3 To transfer the call to the handset, press
transfer, press
talk
The memory locations on the handset and base are not limited to phone
numbers, you may want to store in memory a group of numbers (up to 16
digits) that you need to enter once your call connects. This is referred to
as Chain Dialing.
on the base. The intercom mode is activated,
talk
on the base.
on the handset.
on the handset. To cancel
on the base. To cancel the