Hromakey - Datavideo DVK-400 Instruction Manual

5.2 How to Set the Network Related Settings for the DVK-400 4K Chromakey
Before the operation of the DVK-400 4K Chromakey control software, it is necessary for users to
set the way for controlling the DVK-400 and to connect the DVK-400 to the notebook for operating
the DVK-400 4K Chromakey control software. Please follow following steps for setting the network
related settings of the DVK-400.

Connect by the DVIP Protocol
1. Please make sure that there is an RJ-45 Ethernet cable connected from the RJ-45 interface of
your notebook PC to the DVIP RJ-45 Ethernet interface on the rear panel of the DVK-400.
2. The default static IP address of the DVK-400 is 192.168.100.120. If the DVK-400 is connected to
your notebook PC by the Ethernet cable directly, please set the network setting of your notebook
PC in static IP mode in advance. Moreover, please set the static IP address of your notebook PC in
the same Local Area Network (LAN) with the DVK-400 which is shown as following example.
14