Selecting A Pin Code; Calling Party Control Feature - Uniden EXA 7950 Owner's Manual

NOTE
If you don't select a PIN code
within two minutes, the
system returns to standby.
NOTE
Press skip or repeat
multiple times to scroll
through numbers on
the display.
20

SELECTING A PIN CODE

To play your messages from a remote location, you will need to enter a
two-digit Personal Identification Number (PIN) code (00-99). To select
a PIN, perform the following steps:
1) On the base, press and hold the
button. A beep sounds, and the LED
displays 00.
2) To set the first number, press
or
skip repeat
0 to 9. When the desired number
appears in the display, press
This selects the first number.
3) To set the second number, press
When the desired number appears in the display, press
selects the second number and the entered PIN is announced.

CALLING PARTY CONTROL FEATURE

The Calling Party Control (CPC) feature automatically sets your
answering system to disconnect and reset if the caller hangs up before
leaving a message. This prevents your answering system from
recording a hang up/dial tone.
pin
to scroll from
.
pin
skip
to scroll from 0 to 9.
or
repeat
pin.
pin
This