Setting Your Outgoing Message (Greeting) - Uniden EXA 7950 Owner's Manual

NOTE
You can record up to a
30-second greeting.
Stand within 12 inches in
front of the microphone
and speak clearly when
recording your outgoing
message.
18
4) Press or
skip repeat
1 through 12 display on the base as each hour is announced.
5) Press again to select the correct hour.
clock
6) Press or
skip repeat
numbers 0 through 59 display on the base as each minute
is announced.
7) Press again to select the correct minute. The AM/PM setting
clock
is announced.
8) The LED displays an A or P. Press
correct AM/PM setting.
9) Press again to end the time/day setting. The EXA7950
clock
announces the time that you have set.

SETTING YOUR OUTGOING MESSAGE (GREETING)

When you receive a call, the answering system automatically plays
either a preset message or your own personal outgoing message.
Preset message
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message
after the tone."
To record your own greeting, follow the steps below.
Recording your personal greeting
1) Press and hold
greeting
you hear a long tone. Start
recording your message
immediately after you hear the
long tone end. The message
counter LED will blink,
indicating record mode.
until you hear the current hour setting. Numbers
until you hear the current minute setting. The
or
skip repeat
until
until you hear the