Greenlee CMT-80 Instruction Manual page 5

Important Safety Information
Electric shock hazard:
• Do not operate with the case or battery cover open.
• Before removing the case or battery cover, remove the test leads (or jaw) from
the circuit and shut off the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
• Unless measuring voltage or current, shut off and lock out power. Make sure that
all capacitors are discharged. Voltage must not be present.
• Using this unit near equipment that generates electromagnetic interference can
result in unstable or inaccurate readings.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Do not expose the unit to extremes in temperature or high humidity.
Refer to "Specifications."
• Do not connect to voltage for longer than 30 seconds.
Failure to observe these precautions may result in injury and can damage the unit.
Electric shock hazard:
Do not use the meter to measure voltages in circuits that could be damaged or
actuated by the meter's low input impedance (approximately 4 kΩ).
Failure to observe this precaution may result in injury and can damage the unit.
CMT-80
5