Greenlee CMT-80 Instruction Manual page 4

Clamp-on
Hide thumbs Also See for CMT-80:
Table of Contents

Advertisement

Available languages

Available languages

Important Safety Information
Electric shock and fire hazard:
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Use test leads or accessories that are appropriate for the application. Refer to
the category and voltage rating of the test lead or accessory.
• Inspect the test leads or accessory before use. They must be clean and dry, and
the insulation must be in good condition.
• Use this unit for the manufacturer's intended purpose only, as described in this
manual. Any other use can impair the protection provided by the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
• Do not apply more than the rated voltage between any two input terminals, or
between any input terminal and earth ground.
• Do not contact the test lead tips or any uninsulated portion of the accessory.
Failure to observe these warnings could result in severe injury or death.
4
Electric shock hazard:
Contact with live circuits could result in severe injury or death.

Advertisement

Table of Contents
loading

Table of Contents