Description Of The Appliance - Miele KM 83-2 Operating Instructions Manual

Description of the appliance
KM 83-2
KM 93-2
Description of the appliance
KM 83-2
0 Control panel
® Normal burner
®Fast burner
© Pan support
©Ring support for the Normal burner
© Burner cap
® Ignition device
© Ignition safety control
©Burner head
® Cable for connection
to electricity supply approx. 1.10 m
long, with plug according to country.
© Control for front burner
© Control for rear burner
KM 93-2
C D Control panel
@ Normal burner
® Pan support
©Ring support for the normal burner
© Burner cap
© Ignition device
® Ignition safety control
©Burner head
© Fast burner
® Normal burner
©Cable for connection
to electricity supply, approx. 1.10 m
long, with plug according to country,
©Control for the front right burner
©Control for the rear right burner
@ Control for the rear left burner
©Control for the front left burner
Data plate
Because the data plate is no longer
visible once the appliance has been
built in a 2nd data plate is supplied
which should be stuck into the space
provided on page 15 of these instruc-
tions under After Sales Service.
Special accessories
Special accessories are available from
your Miele Dealer or from the Spare
Parts Department.
• Stainless steel cover EA 80
A stainless steel cover is available for
the KM 83-2 hob. Check availability in
each country. For installation of the
cover a minimum distance of 510 mm
(or respective distance for cooker hood
in installation instructions) is required
between the worktop and wall units.
Do not install the DA 8-2 directly
next to the gas hob.
3