Seven-Digit.dialing; Deleting.caller.id.numbers - Uniden DECT3080 SERIES User Manual

Seven-digit dialing
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..This.setting.applies.to.the.
base.and.all.handsets.currently.connected.to.the.same.base..
To.program.your.local.area.code:
) Press.[Select/menu]..
2) Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
3) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[Int'com/clear].to.delete.the.stored.code,.and.then.enter.a.new.one.
4) Press.[Select/menu]. You will hear a confirmation tone.
Note:. If.you.have.multiple.bases,.select.the.base.before.programming.the.area.code.(see.page.4).
• The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area
code.to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.handset.hides.the.area.code.in.the.
Caller.ID.list.
• When.you.are.reviewing.the.Caller.ID.list,.you.can.show.the.hidden.area.code.by.pressing.[#]..Press.[#].again.to.
hide.the.area.code..
• When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.dials.or.stores.the.
digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.[#].to.show.the.area.
code.before.you.dial.or.store.the.number..(See.page.26.to.store.a.Caller.ID.record.in.the.phonebook.)
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.[
delete..Press.[Select/menu] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.press.[
DELETE ALL. When the phone asks you to confirm, select YES.
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
. •.Caller.ID.numbers.are.stored.separately.in.each.handset..Deleting.a.record.from.one.handset.will.not.delete.
the.record.from.any.other.handsets.
] when the phone is in standby, and then find the number you want to
].when.the.phone.is.in.standby..Press.[Select/menu].and.select.
34 34