Selecting.the.base - Uniden DECT3080 SERIES User Manual

Selecting the base
When.your.handset.is.registered.to.another.base,.it.will.automatically.connect.to.the.base..A.base.ID.(that.is.for.the.
handset.only).will.be.assigned.in.the.order.of.registration..You.can.either.select.a.base.you.want.to.use.manually,.or.
set.to.AUTO..If.you.set.to.AUTO,.when.the.handset.comes.out.of.range,.it.searches.automatically.the.available.base.
in.order.of.base.ID.
) With.the.phone.in.standby,.press.[Select/menu]..Select.the.HANDSET.SETUP.menu,.and.then.the.SELECT.
BASE.submenu.
2) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.AUTO.to.have.the.handset.automatically.
select.the.base.
3) Press.[Select/menu]..SEARCHING.will.appear.in.the.display.
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,."SEARCHING".continues.
to appear. You can repeat the procedure listed above to return back to the original connection or to find the
different.base.
Note:. You.cannot.change.bases.during.a.call..
4