Seven-Digit Dialing; Deleting Caller Id Numbers - Uniden WXI2077 Series Product Manual

Uniden wxi2077 series multi-handset phone with a waterproof handset product manual

Hide thumbs Also See for WXI2077 Series:

Table of Contents

Seven-digit dialing

If you can make a local call by dialing only seven digits instead of ten, you can tell the phone to hide your local area

code in the Caller ID list; any calls from outside your area code will show all ten digits. This setting applies to the

base and all handsets currently connected to the same base.

To program your local area code:

Press Menu/Select.

)

Select the GLOBAL SETUP menu, and then the AREA CODE submenu.

Use the number keypad (0 through 9) to enter a three-digit area code. If an area code has already been stored,

it appears in the display. Press Clear/int'com to delete the stored code, and then enter a new one.

Press Menu/Select. You will hear a confirmation tone.

Note: If you have multiple bases, select the base before programming the area code (see page 14).

•

The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area

code to the code programmed on the phone. If the two codes match, the handset hides the area code in the

Caller ID list.

•

When you are reviewing the Caller ID list, you can show the hidden area code by pressing #. Press # again to

hide the area code.

•

When you dial from a Caller ID record or store a Caller ID record in the phonebook, the phone dials or stores the

digits exactly as they appear on the display. If you need to use ten digits, be sure to press # to show the area

code before you dial or store the number. (See page 6 to store a Caller ID record in the phonebook.)

To delete only one Caller ID number, press

delete. Press Menu/Select and select DELETE ENTRY. When the phone asks you to confirm, select YES.

To delete all the Caller ID numbers, press

phone asks you to confirm, select YES.

Notes: • When you delete a Caller ID number, you delete it permanently.

• Caller ID numbers are stored separately in each handset. Deleting a record from one handset will not delete

the record from any other handsets.

when the phone is in standby, and then find the number you want to

when the phone is in standby, and then press Menu/Select. When the

Table of Contents