Tone Dialing Switch Over; Installing The Optional Headset; Seven-Digit Dialing - Uniden WIN1200 Series Owner's Manual

Uniden win1200: user guide

Hide thumbs Also See for WIN1200 Series:

Table of Contents

Tone Dialing Switch Over

If your phone is set to use pulse dialing for regular phone calls, you can switch to tone dialing after the call connects.

This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers,

telephone prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press

. Any digits you enter from then on will be sent with tone dialing. When this particular call ends, the phone

TONE

automatically returns to pulse dialing.

See Changing the Dial Mode on page 15 for instructions on setting your phone for pulse or tone dialing.

Your phone may be used with an optional headset. To use a headset,

open the rubber headset jack cover on the side of the handset and

insert the headset plug into the headset jack. (Headsets may be

purchased by calling the Uniden Parts Department. See back cover

page for contact information.)

If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your

phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your

area code will show all 10 digits.

1. With the phone in standby, press the center of the joystick and select the system setup icon

Table of Contents