Using a multi-handset system
If you have a DECT 1915/1915+1 multi-handset system,
you can register additional handsets
six handsets per base unit. With two or more handsets
registered, you can:
■
make intercom calls from one handset to another
■
transfer an outside call from one handset to another
■
shuttle between an outside call and an intercom call
■
set up a three-way conference call
Each handset's number (
Only one handset can be connected to the outside
!
line at once. If you try to make a call while another
handset is already using the line, you'll hear rapid
'beeps' and the display will show
To make an
1
Press and hold the INT
intercom call
u The display a list of handset numbers
in this example,
2
Key in a handset number
handset 1 is
u The display shows
calling handset 2)
Handset 2
. Handset 2 rings with Intercom
melody and its display shows
and the name and number of the calling handset.
3
Press any button (except HANG UP) on the
ringing handset to answer the call
◗
To end an
Press the HANG UP button;
intercom call
or simply replace the handset on the
base unit or charger pod
u The other handset beeps rapidly. The user
can press the HANG UP button or simply wait
a moment for the display to return to standby
mode.
—
altogether, up to
1
6
to
) is shown on its display.
Line busy
.
✱
button for 1 second
Handset 1 calls
Internal call!
25