Uniden DECT1915+1 User Manual page 48

ADVANCED USE
Acoustic
To change the base unit's ringer volume and melody.
There are nine volume levels, or you can select
turn the ringer off altogether. The handset(s) will still
ring for incoming calls when the base unit's ringer is
turned off.
There are ten melodies. Scroll between the options to
play them, and select
want.
Please note — if you select a long melody, you may find
that your DECT 1915/1915+1 base unit carries on ringing for
a few moments after you've answered a call using another
phone connected to your line.
Dialing
You won't need this unless you're using your DECT
1915/1915+1 on a PBX.
Flash time
To change the length of the Flash
signal; leave it at the default setting of
100 msec unless your PBX requires a
different Flash setting.
LAN
To set a digit which will be automat-
ically dialled at the beginning of every
number you dial (for example, 9 for an
outside line).
De-register
See page 29.
PIN Base
To change the base unit's PIN code. The default PIN is
0000, which means you won't be prompted to key it in,
except when you register or de-register a handset. To
change it to any other four-digit number:
■ If you first see the prompt
the current PIN then select
■ When you see the prompt
new PIN then select
If you want to turn off the PIN, simply change it to
0000. Then you won't ever be prompted to key in a PIN
Base
to use the menus.
Quick reference guide to the menus
Off
to
OK
when you find the one you
Base-PIN ____
, key in
OK
New ____
, key in your
OK
45