Programming.one-Touch.voice.mail.access; Resetting.the.voice.message.waiting.indicator - Uniden DECT1560 Series User Manual

Programming one-touch voice mail access
You.can.program.your.voice.mail.access.number.to.the.Voice.Mail.key.
your.messages.at.the.touch.of.a.button..Your.voice.mail.service.provider.will.supply.you.with.the.access.number.(this.
may.be.simply.a.phone.number).
To.edit.the.voice.mail.number,.follow.the.steps.below:
1) Press.MENU/SELECT.
) Move.the.cursor.to.select.the.Handset Setup.menu.and.press..
MENU/SELECT.
3) Move.the.cursor.to.select.Edit Voice Mail.and.press.MENU/SELECT.
4) Enter.your.personal.access.number.(up.to.twenty.digits)..If.you.need.to.have.
the.phone.wait.before.sending.the.next.digits,.press.rEDiAL/PAUSE.to.
insert.a.two-second.pause.in.the.dialing.sequence..For.a.longer.pause,.press.rEDiAL/PAUSE.multiple.times..A.
P.appears.in.the.display.each.time.you.press.rEDiAL/PAUSE.and.each.pause.counts.as.one.digit.
5) Press.MENU/SELECT when you are finished. You will hear a confirmation tone.
Resetting the voice message waiting indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and
appears.in.the.handset.display..In.the.event.your.message.waiting.light.gets.out.of.sync.with.your.phone.company's.
voice.messaging.system,.you.can.manually.reset.it.back.to.the."No.messages.waiting".state.
1) Press.and.hold.FiND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
) A.beep.sounds.and.the.message.alert.tone.is.reset.
/MUTE.on.each.handset.so.you.can.get.
43
..