Programming.one-Touch.voice.mail.access; Resetting.the.voice.mail.waiting.indicator - Uniden DECT2060 Series Owner's Manual

Programming One-Touch Voice Mail Access
You.can.program.your.voice.mail.access.number.to.the.Voice.Mail.key.[
your.messages.at.the.touch.of.a.button..Your.voice.mail.service.provider.will.supply.you.with.the.access.number.
This.number.may.be.simply.a.phone.number.
To.edit.the.voice.mail.number,.follow.the.steps.below:
) Press.[Menu/Select].
2) Move.the.cursor.to.select.the.HANDSET.SETUP.menu.and.press..
[Menu/Select].
3) Move.the.cursor.to.select.EDIT.VOICE.MAIL.and.press.[Menu/Select].
4) Enter.your.personal.access.number.(up.to.twenty.digits).
5) If.you.need.to.have.the.phone.wait.before.sending.the.next.digits,.press.[Redial/Pause].to.insert.a.two-second.
pause.in.the.dialing.sequence..For.a.longer.pause,.press.[Redial/Pause].multiple.times..A.P.appears.in.the.
display.each.time.you.press.[Redial/Pause].and.each.pause.counts.as.one.digit.
6) Press.[Menu/Select] when you are finished.
Resetting the Voice Mail Waiting Indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and
appears.in.the.handset.display..In.the.event.your.message.alert.tone.gets.out.of.sync.with.your.phone.company's.
voice.messaging.system,.you.can.reset.back.to.its.original."no.messages.waiting".state..To.reset,.press.and.hold.
[find hs] on the base for five seconds. A beep sounds and the message alert tone is reset.
/Mute].on.each.handset.so.you.can.get.
27
..