Uniden DECT1560 Series User Manual page 45

Place the mounting slots over
the pins on the wall plate.
Slide the base
down to lock it
into place.
Removing the wall-mount bracket
At the bottom of the base,
pinch the two "nose" of
the wall-mount bracket
as shown, and then
slide the bracket away
from the base.
Wall plate
Note:. Mounting.the.phone.directly.on.the.wall
• Be.sure.the.wall.is.capable.of.supporting.the.
weight.of.the.phone,.and.use.the.proper.type.of.
anchoring.device.for.the.wall.material.
• Insert.two.#10.screws.(minimum.length.of.1.
inches,.not.supplied).into.the.wall,.3.
apart...
• Leave.the.screw.heads.
wall.to.allow.room.for.mounting.the.phone..
• Align.the.mounting.slots.over.the.screws.and.
slide.the.base.down.into.place.as.shown.above.
45
(To AC outlet)
/ .
3
8
/ .inches.
15
16
/ .inch.away.from.the.
1
8