Resetting.the.handset.without.the.base - Uniden DECT1560 Series User Manual

1) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.15).
) Press.and.hold.END.and.# for more than five seconds. Select Deregister HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.
4) The phone will ask you to confirm the deregistration. Select Yes..The.selected.handset.will.clear.its.registration.
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.Handset not registered-place handset on base to
register. See your Owner's Manual for help.
6) Re-register.the.handset.to.the.base.(see.Registering.accessory.handsets.on.page.13)..
If.the.handset.cannot.contact.the.base,.it.will.display.Out Of Range..Make.sure.the.handset.is.in.range.of.the.base.
and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
1) Press.and.hold.END.and.# for at least five seconds.
) Move.the.cursor.to.select.Base Unavailable.and.then.press.MENU/SELECT.
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.MENU/SELECT..Base Unavailable.appears.
4) Move.the.cursor.to.select.Yes,.and.then.press.MENU/SELECT. You hear a confirmation tone, and the handset
deletes.its.own.base.information.without.contacting.the.base..If.the.handset.was.registered.to.only.one.base,.
it.displays.Handset not registered-place handset on base to register. See your Owner's Manual for help..If.the.
handset.is.still.registered.to.another.base,.it.searches.for.the.other.base.and.then.returns.to.standby.
5) Register.the.handset.to.the.new.base.(see.Registering.accessory.handsets.on.page.13).
5