Oracle Sun Server X4-4 Installation Manual page 19

The preferred procedure for a remote installation is to use Oracle System Assistant's assisted
Install OS task.
Note -
significantly increases the time necessary to perform the installation as the content of the CD/
DVD-ROM is accessed over the network. The installation duration depends on the network
connectivity and traffic. This installation method also has a greater risk of issues due to
transient network errors.
The following requirements must be met:
Before You Begin
Perform the server installation as described in the
■
Set up the server service processor (SP). Follow the instructions in the Oracle ILOM
■
documentation for your server.
The Oracle ILOM Remote Console Plus system can be any client with a browser connected
■
to a network that has access to the Sun Server X4-4 Ethernet management port.
Ensure that you have met the Java, browser, and configuration requirements to run
■
Oracle ILOM Remote Console Plus on a remote client as described in the Oracle ILOM
Administrator's Guide for Configuration and Maintenance for your server's version of
Oracle ILOM at: http://www.oracle.com/goto/ILOM/docs.
Note -
see.
To access Oracle ILOM, type the IP address of the service processor into a
1.
browser on the Oracle ILOM Remote Console Plus system.
Answer any security prompts, as needed.
Using the CD/DVD-ROM or CD/DVD-ROM ISO image option to install the OS
Some of the screen images shown in this procedure might differ from the screens you
Set Up for Remote Installation
Sun Server X4-4 Installation Guide
Preparing to Install the OS 19