Table of Contents
Advertisement
Conferencing
If you have more than one handset, up to four people can
participate in a conference call. A three-way conference call
consists of an outside line and two stations. A four-way
conference call consists of an outside line, the base speaker
phone, and two handsets. You can easily join a call already in
progress.
From the handset, press [ / flash] or
base, press [speaker]. You can hang up normally; the other
station will still be connected to the call.
Transferring a Call
You can transfer a call from one station to another.
From the base
1. During a call, press [int'com]
([hold/int'com/xfer] on the dual-keypad base).
2. The call will automatically be placed on hold, and
a paging tone sounds on all stations. (On the
dual-keypad base, you can select the handset
you want to talk with by pressing [1] through [4],
or press [*/tone] to page all registered
handsets.) To cancel the transfer, press
[speaker] or [int'com] ([hold/int'com/xfer]).
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press [speaker] again.
[ ]
to join the call. From the
From the handset
37
1. During a call, press [xfer/intercom].
2. Use [
] or [
] to select the station you want
to transfer the call to, then press [select/
The call will automatically be placed on hold, and
a paging tone sounds. To cancel the transfer,
[ ]
press [ / flash] or
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press [ / flash] again or
] .
.
[ ]
.
Advertisement
Table of Contents
