Using Hold, Conference, and Transfer
Placing a Call on Hold
During a call, press
[xfer/intercom]
than ten seconds, the display screen will read LINE ON HOLD.
To return to the party on hold, press
Notes:
!
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party's line is
disconnected and the phone returns to standby.
!
While a call is on hold, Caller ID and Call Waiting can not be used.
Conferencing
If you have more than one handset, up to three people can participate in a conference call. A three-way conference
call consists of an outside line and two handsets. You can easily join a call already in progress.
1. Press
[ /flash]
or
[
]
on the handset to join the call.
2. To hang up, return the handset to the cradle or press
to the call.
on the handset to place the caller on hold. If you leave a caller on hold for more
[ /flash]
or
[
]
on a handset. The phone returns to the holding party.
[
]
on the handset. The other station will still be connected
[39]