Room/Baby Monitor - Uniden DCT7085 Series Owner's Manual

Room/Baby Monitor

This feature allows you to monitor sounds in another room.
Place a station in the room you wish to monitor; it will
function as a microphone. Any handset can be set to
function as a remote speaker, allowing you to monitor
sounds in the room.
1. Press [menu/clear] and enter the ROOM MONITOR
menu. TO ROOM MONITOR appears in the display.
2. Use [ ] or [
monitor.
3. Press [select/
you hear sounds in the room where the station is
installed.
4. To turn off the room monitor, press [ ] or return the
handset to the cradle.
Note:
This feature only works when handsets are within the range of the
base.
If the party is out of range, UNAVAILABLE appears in the display,
and the operation will be canceled.
While a pair of handsets is in Room/Baby Monitoring, they cannot
be used to make or receive calls. Other handsets can still make
and receive calls.
You cannot listen from the base; the base can only function as a microphone
] to select the station you want to
] . ROOM MONITOR appears, and
42