Champion 100683 Operator's Manual page 5

100683 - CURvED ShAfT TRiMMER
– Mix fuel outdoors where there are no sparks or flames.
– Loosen fuel cap slowly to release pressure and to keep fuel
from escaping around the cap.
– Tighten the fuel cap securely after refueling.
– Wipe spilled fuel from the unit. Move 30' (9 m) away from
refueling site before starting engine.
– Never attempt to burn off spilled fuel under any
circumstances.
– To reduce the risk of fire and burn injury, handle fuel with
care. It is highly flammable.
– If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors have
dissipated.
– Replace all fuel tank and container caps securely.
– Empty fuel tank into a container approved for gasoline
and restrain the unit from moving before transporting in a
vehicle.
– When draining the fuel tank, use an approved fuel storage
container in a well-ventilated area.
– Select bare ground, stop engine, and allow to cool before
refueling.
– Save these instructions. Refer to them frequently and use
them to instruct others who may use this product. If you
loan someone this tool, loan them these instructions also.
iMPORTANT SAfETY iNSTRUCTiONS
5