Storing Phone Numbers; Making Calls With Memory Dialing; Deleting The Stored Data - Uniden Cordless Telephon Owner's Manual

• If you have not pressed
any key for 30 seconds,
the phone returns to the
standby mode.
• If you get an incoming
call, the operation
is canceled.
• If you select a memory
location that does not
have a stored number,
the base will beep
rapidly and the phone
will not dial.
[ 36 ] P H O N E B O O K
You can store 10 phone numbers in the base, and make calls with memory dialing
from the base.

Storing Phone Numbers

1) Press memory in the standby mode.
2) Enter the number you wish to store. (The number cannot exceed 20 digits.)
3) Press memory. Enter the memory location number (0-9) on the keypad.
You will hear a confirmation tone.
• The 10 memory locations in the base are independent from the handset.
• The pause key counts as one digit. Pressing pause more than once increases the length of
pause between numbers.

Making Calls with Memory Dialing

1) Press (talk) in the standby mode.
2) Press memory. Enter the memory location number (0-9) to dial the number.

Deleting the Stored Data

1) Press memory in the standby mode.
2) Press memory again.
3) Enter the memory location number (0-9) you wish to delete. You will hear a
confirmation tone.