Calling A Party From The Caller Id List; Long Distance Calls And Area Code Setting/Cancellation - Uniden Cordless Telephon Owner's Manual

• You cannot make a call
from the Caller ID list if
your phone is connected
to a private branch
exchange (PBX).
• When a long distance
call has been set, " "
appears in the display.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
[ 40 ] C A L L E R I D

Calling a party from the Caller ID list

From Standby mode
1) Press call id/ . The summary screen appears. The screen shows
the number of new messages and the total number of messages.
2) Use the number keypad (2-9 and 0), +, or - to view the Caller ID message list.
3) Press talk/flash or spkr. The displayed phone number
dials automatically.
From Talk mode
1) Press talk/flash.
2) Press call id/ . The summary screen appears.
3) View the Caller ID message you want to dial.
4) Press select/ch. The displayed phone number will be dialed.

Long Distance calls and Area Code Setting/Cancellation

While the present Caller ID information is displayed, pressing
remove the prefix " " in the display to set the call for a long distance call, or pressing #
will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming
call information (i.e., Caller ID list), the phone number and name of the party on the
Caller ID list can be stored in memory.
1) When the phone is in the standby mode, while the incoming Caller
ID information is displayed, press
2) Press + or - to choose "
or " " (RocketDial location). To cancel Storing,
select " ".
/tone will place or
/RocketDial/ .
" (Phonebook locations)